Startseite > Übersicht

Kategorie: Raspberry Pi

Epaper Display Raspberry vergleich

waveshare 2.13inch E-Paper Display HAT V4 Version 250x122 Resolution 3.3V/5V Two-Color e-Ink Display epaper Screen for Raspberry Pi Zero/Zero W/Zero WH/3B/3B+/4B, Partial Refresh, SPI Interface

  • Compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+/4B
  • Ultra low power consumption, basically power is only required for refreshing
  • SPI interface, for connecting with other controller boards like Arduino/Nucleo, etc.
20,15 €
Zuletzt Aktualisiert: 22.11.2025 03:53 Uhr

2.7inch E-Paper Display Module 264x176 Resolution 3.3V/5V Two-Color E-Ink Display epaper Screen HAT for Raspberry Pi/Jetson Nano/Arduino/Nucleo Support Partial Refresh,SPI Interface

  • Compatible with Raspberry Pi 2B/3B/3B+/Zero/Zero W,Jetson Nano
  • SPI interface, for connecting with other controller boards like Raspberry/Arduino/Nucleo, etc.
  • Onboard voltage translator, compatible with 3.3V/5V MCUs,Onboard 4x Keys
24,09 €
Zuletzt Aktualisiert: 22.11.2025 03:53 Uhr

Waveshare 7.5 Inch E-Paper Display Hat Module V2 Kit 800x480 Resolution 3.3v/5v E-Ink Electronic Screen with Embedded Controller SPI Interface Compatible with Raspberry Pi/Jetson Nano/Arduino/STM32

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
69,99 €
Zuletzt Aktualisiert: 22.11.2025 03:53 Uhr

7.5inch E-Paper Display 800x480 Resolution, SPI Interface E-Ink Screen for Raspberry Pi, Arduino, STM32, ESP32 - Monochrome HAT with Partial Refresh & Open-Source Code

  • High-Resolution E-Ink Display – 7.5-inch monochrome E-Paper screen with 800x480 resolution, delivering crisp text and graphics for e-books, digital signage, industrial labels, and IoT projects.
  • Fits Raspberry Pi & Multi-Board – Designed for Raspberry Pi 40-pin GPIO (all models) and pre-configured SPI interface for Arduino, STM32, and ESP32 integration. Level-shifting chip supports 3.3V/5V microcontrollers.
  • SPI Communication & Partial Refresh – Optimized SPI interface minimizes pin usage and enables fast full/partial refresh modes to reduce power consumption and screen flickering.
59,50 €
Zuletzt Aktualisiert: 22.11.2025 03:53 Uhr

Waveshare 1.54inch e-Paper Module (G), with Driver Board, E-Ink Display, 200x200, Red/Yellow/Black/White, SPI Interface

  • 1.54inch e-Paper Module (G), with driver board
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
18,99 €
Zuletzt Aktualisiert: 22.11.2025 03:53 Uhr

1.54inch E-Paper Display Module 200x200 Resolution 3.3V/5V Two-Color E-Ink Display epaper Screen for Raspberry Pi/Jetson Nano/Arduino/Nucleo Support Partial Refresh, SPI Interface

  • SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc.
  • Ultra low power consumption, basically power is only required for refreshing
  • Onboard voltage translator, compatible with 3.3V/5V MCUs
19,32 €
Zuletzt Aktualisiert: 22.11.2025 03:53 Uhr

Coolwell 7.5 Inch E-Paper Display HAT Module 800x480 E-Ink Electronic Paper Screen for Raspberry Pi/Arduino/Jetson Nano SPI Interface with WiFi/Bluetooth ESP32 Driver Board

  • 7.5 inch e-paper display, no backlight, keeps displaying last content for a long time even when power down
  • For Arduino eink display, ultra low power consumption, basically power is only required for refreshing
  • Universal e-Paper Driver Board with WiFi / Bluetooth SoC ESP32 onboard, supports various Waveshare SPI e-Paper raw panels
71,50 €
Zuletzt Aktualisiert: 22.11.2025 03:53 Uhr

Waveshare 2.13inch Touch E-Paper E-Ink Display for Raspberry Pi Zero 250×122 Pixels Supports Partial Refresh with ABS Protection Case

  • 2.13" capacitive touch e-Paper display, 5-point touch, 250×122 pixels. Supports waken up by user-defined gesture
  • No backlight, keeps displaying last content for a long time even when power down
  • Ultra low power consumption, basically power is only required for refreshing
36,99 €
Zuletzt Aktualisiert: 22.11.2025 03:53 Uhr

SeenGreat 1.54 Inch E-Ink Display Three Color E-Paper Screen for Raspberry Pi/Arduino/Jetson Nano/STM32 200x200 Pixels Red Black White SPI Interface

  • 1.54inch Epaper display for Raspberry Pi, 200 * 200 pixels, can display three colors: red, black, and white
  • 1.54 inch eink screen, SPI interface, minimal pin usage
  • 1.54 inch e-paper module, onboard Voltage Translator, compatible with both 3.3V and 5V microcontroller interfaces
18,95 €
Zuletzt Aktualisiert: 22.11.2025 03:53 Uhr

Waveshare 7.5 Inch E-Paper Raw Display Panel V2 800x480 Resolution 3.3V E-Ink Electronic Paper Screen Without PCB with Embedded Controller,Communicating via SPI Interface

  • Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink raw display, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface.Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
  • Ultra low power consumption, basically power is only required for refreshing
  • Comes with development resources and manual (driver board schematic, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
66,99 €
Zuletzt Aktualisiert: 22.11.2025 03:53 Uhr