Kategorie: Raspberry Pi
Raspberry pi Netzwerkkarte vergleich
- PCIe to M.2 with PoE HAT designed for Raspberry Pi 5, supports IEEE 802.3af/at network standard, adapter for NVMe protocol M.2 Solid State Drive, high-speed reading/writing
- POE M.2 HAT+ expansion board connecting to PI5 via 16PIN cable, based on 16PIN PCIe interface of Raspberry Pi 5. Standard Raspberry Pi 40PIN GPIO stackable header, allows connecting other HATs
- NVMe Drive Slot support, only supports the NVMe Protocol Solid State Drives, compatible with 2230/2242 Size M.2 Solid State Drive, supports Gen2 and Gen3 modes, supports booting PI5 from Solid State Drive
€
Zuletzt Aktualisiert: 04.05.2026 04:19 Uhr
- PCIe TO Gigabit ETH Board (C) Designed for Raspberry Pi 5
- Supports Raspberry Pi OS, Driver-Free, Plug And Play
- Connecting To PI5 Via 16PIN Cable,Based On 16PIN PCIe Interface Of Raspberry Pi 5
€
Zuletzt Aktualisiert: 04.05.2026 04:19 Uhr
- This expansion board adds one M.2 E-KEY interface and one 2.5GBE network port for Raspberry Pi 5, which can meet your various needs for those who need to use Raspberry Pi 5 as a Router, Gateway, Firewall, Robot, Smart Home, NAS, VOIP, Industrial Equipment, Telecommunications Equipment and other network devices that need more than one network port.
- Through the PCIe interface with PCIe Switch chip to expand into two PCIe interfaces, one to achieve the expansion of M.2 E-KEY and the other to achieve the expansion of 2.5Gbps Ethernet through the RTL8125 chip.
- The ZP596 is an adapter board with PCIe interface for WiFi7/6/6E/5, allowing Raspberry Pi 5 motherboard to use the latest WIFI7 module. The WIFI7 module can be inserted into the ZP596 adapter board via the M.2 E-KEY interface, which provides an opportunity for a wide range of Raspberry Pi 5 users to be able to use the latest WIFI7.
€
Zuletzt Aktualisiert: 04.05.2026 04:19 Uhr
€
Zuletzt Aktualisiert: 04.05.2026 04:19 Uhr
- This kit includes a ZP591 PCIe Peripheral Board and a ZC506 aluminum case. It is compatible with the latest Raspberry Pi 5 2GB/4GB/8GB/16GB board.
- This expansion board adds one 2.5GBE network port for Raspberry Pi 5, which can meet your various needs for those who need to use Raspberry Pi 5 as a Router, Gateway, Firewall, Robot, Smart Home, NAS, VOIP, Industrial Equipment, Telecommunications Equipment and other network devices that need more than one network port.
- PCIe to 2.5G Ethernet Port HAT expansion board, able to achieve high-speed reading/writing. Through the RTL8125 chip to achieve the expansion of 2.5Gbps Ethernet.
€
Zuletzt Aktualisiert: 04.05.2026 04:19 Uhr
- This expansion board adds one 2.5G network port for Raspberry Pi 5, which can meet your various needs for those who need to use Raspberry Pi 5 as a Router, Gateway, Firewall, Robot, Smart Home, NAS, VOIP, Industrial Equipment, Telecommunications Equipment and other network devices that need more than one network port.
- PCIe to 2.5G Ethernet Port HAT expansion board, able to achieve high-speed reading/writing. Through the RTL8125 chip to achieve the expansion of 2.5Gbps Ethernet.
- After power on, the board can be automatically recognised as eth1 without installing driver under Raspberry Pi official OS system. When you use OpenWrt, you need to compile the RTL8125 driver into the firmware. When you use ubuntu system, you need to install the RTL8125 driver and then you can use it.
€
Zuletzt Aktualisiert: 04.05.2026 04:19 Uhr
- This is PCIe TO MiniPCIe GbE USB3.2 HAT+ version: includes the PCIe HAT + accessories This adapter board supports convert the PCIe interface to USB3.2, MiniPCIe and Gigabit ETH, designed for Raspberry Pi 5. It is compatible with multiple MiniPCIe 4G modules or MiniPCIe devices, supports PCI-E×1 Gen2 mode and high-speed communication.
- PCIe to MiniPCIe slot, Gigabit Ethernet, and USB 3.2 Gen1 ports.Designed for Raspberry Pi 5, driver-free, plug and play, with HAT+ standard, onboard I2C EEPROM, and support 40pin GPIO header for stacking and expansion.
- Onboard MiniPCIe slot, Compatible with SIM7600G-H-PCIE / EG25-G-mPCIe series 4G modules. Note: The 4G module is optional, please refer to the Package Content for detailed part list. The above are the supported modules after testing; If you need to use with other modules, please confirm the interface compatibility of your module.
€
Zuletzt Aktualisiert: 04.05.2026 04:19 Uhr
- This expansion board adds two 2.5GBE network port for Raspberry Pi 5, which can meet your various needs for those who need to use Raspberry Pi 5 as a Router, Gateway, Firewall, Robot, Smart Home, NAS, VOIP, Industrial Equipment, Telecommunications Equipment and other network devices that need more than one network port.
- Through the PCIe interface with PCIe Switch chip to expand into two PCIe interfaces and then through the RTL8125 chip to achieve the expansion of dual 2.5Gbps Ethernet.
- After power on, the expansion board can be automatically recognised as eth1 and eth2 without installing driver under Raspberry Pi official OS system. When you use OpenWrt, you need to compile the RTL8125 driver into the firmware. When you use ubuntu system, you need to install the driver of RTL8125 and then you can use it.
€
Zuletzt Aktualisiert: 04.05.2026 04:19 Uhr
- For reference only, the Raspberry Pi 5 and cooling fan are NOT included, please refer to the Package Content for detailed part list. [Connecting To PI5 Via 16PIN Cable]: Based On 16PIN PCIe Interface Of Raspberry Pi 5
- [More USB Capability For Raspberry Pi 5]: Extends The PCIe Interface To 3x High Speed USB 3.2 Gen1 Ports For Connecting More Peripherals
- [Extends 1x Gigabit Ethernet Port]: Equipped With RTL8153B High-Performance Gigabit ETH Chip, Sinking Design Of Network Port, Neat And Beautiful
€
Zuletzt Aktualisiert: 04.05.2026 04:19 Uhr
- Compatibility: This kit includes an aluminum case and PCIe to WiFi7 expansion board. It is compatible with the latest Raspberry Pi 5 2GB/4GB/8GB/16GB board.
- WIFI7 Module Supported: The ZP590A (ASIN: B0D78TWCB9) is an adapter board with PCIe interface for WIFI7, allowing Raspberry Pi 5 motherboard to use the latest WIFI7 module. The WIFI7 module can be inserted into the ZP590A adapter board via the M.2 E-KEY interface, which provides an opportunity for a wide range of Raspberry Pi 5 users to be able to use the latest WIFI7. (Note: The Raspberry Pi 5 and WIFI module are not included.)
- High-quality Material: The enclosure is made of lightweight and durable aluminum material, it can offer excellent protection and heat dissipation for the Raspberry Pi 5 board and expansion board.
€
Zuletzt Aktualisiert: 04.05.2026 04:19 Uhr