Kategorie: Raspberry Pi
Raspberry pi Top vergleich
- 【Compatibility】① for Raspberry Pi 5 with TOP PCIe to M2 NVMe shield like X1001 (ASIN: B0CPLF6JYX), X1004 (ASIN: B0D22JPQRB), X1003 (ASIN:B0CSJZ7NSS), X1012 (ASIN: B0D6YBTYT4), M901(ASIN; B0D179YJ9K) , X1000 (ASIN: B0CQ4NTZ7G) ②for separate Raspberry Pi 5 8GB / 4GB Motherboard
- 【Official Raspberry Pi 5 Active Cooler Included】Input voltage: 5V DC supplied via four-pin fan header on Raspberry Pi 5; Fan speed control: Pulse width modulation control with tachometer; Maximum airflow: 1.09 CFM; Maximum fan speed: 8000 RPM +/- 15%
- 【Easy Access to Pi 5】P579 Raspberry Pi 5 Case can easy access to Raspberry Pi 5 usb-c power jack, micro HDMI ports, usb ports, Ethernet jack, sd card slot, power button, etc.
23,50 €
Zuletzt Aktualisiert: 17.03.2025 20:57 Uhr
- 【Compatibility】① Support Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like N04 (ASIN: B0CTLX5MW5), N05 (ASIN: B0CTLT39Y3) ②Support separate Raspberry Pi 5 8GB / 4GB Motherboard ③ Support Official Raspberry Pi 5 Active Cooler (case with active cooler,ASIN: B0CLGBCR5F)
- 【Robust and Portable】This Raspberry Pi 5 Case is made of High-Quality Aluminum material, can provide a strong and durable protection for your Raspberry Pi 5 Board.
- 【Good Cooling Effect】With 40mm quiet cooling fan and copper heatsinks provide Raspberry Pi 5 with a good cooling effect.
17,99 €
Zuletzt Aktualisiert: 17.03.2025 20:57 Uhr
- 【Compatibility】① Support Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like N04 (ASIN: B0CTLX5MW5), N05 (ASIN: B0CTLT39Y3) ②Support separate Raspberry Pi 5 8GB / 4GB Motherboard ③ Support Official Raspberry Pi 5 Active Cooler (case with active cooler,ASIN: B0CMZG29LG)
- 【Robust and Portable】This Raspberry Pi 5 Metal Case is made of High-Quality iron material, can provide a strong and durable protection for your Raspberry Pi 5 Board.
- 【Good Cooling Effect】With 40mm quiet cooling fan and copper heatsinks provide Raspberry Pi 5 with a good cooling effect.
16,99 €
Zuletzt Aktualisiert: 17.03.2025 20:57 Uhr
- Compatible Models: Raspberry Pi 5 / 4B / 3B+ / 3B / 3A+ / 2B / 1B+ / 1A+ / Zero 2 W / Zero W / Zero (Note: NOT compatible with 500 / 400)
- GPIO Status LED: LED on if GPIO outputs / inputs high level, LED off if GPIO outputs / inputs low level
- Independent LED: The status LED is driven by the chip instead of the GPIO so the GPIO will not be affected
11,95 €
Zuletzt Aktualisiert: 17.03.2025 20:57 Uhr
- Compatibility:Miuzei MC73 Metal Case ① Support Raspberry Pi 5 with PCIe M.2 NVMe Shield TOP like :X1003 X1000 X1001 X1004 ALL Expansion Board at the Top ②Support separate Raspberry Pi 5 8GB / 4GB Motherboard ③ Support Official Raspberry Pi 5 Active Cooler（Not Included）④ Unterstützen Miuzei Kühlkörper:asin B0CTMFH133 （Not Included）
- Kompaktes Design: Die obere Abdeckung des Aluminium gehäuses besteht aus hochwertigem, transparentem Acryl, das nicht nur die Störung des WiFi-Signals durch das Metallgehäuse wirksam verhindert, sondern auch den Arbeitsstatus des Raspberry Pi 5 deutlich sichtbar macht; gleichzeitig helfen die seitlichen Öffnungen, die Wärme schneller abzuleiten.
- Significant cooling:The Raspberry Pi 5 aluminium case is made of high quality aluminium alloy for durable protection, and the plating process makes the case shiny and textured, and with the active cooler, the Raspberry Pi 5 is able to run at high speeds even when multiple expansion devices are used at the same time.
12,89 €
Zuletzt Aktualisiert: 17.03.2025 20:57 Uhr
Geekworm X1003 PCIe to M.2 NVMe SSD Pip PCIe Peripheral Board Top for Raspberry Pi 5 & Active Cooler
- 【IMPORTANT NOTE】X1003 MUST use with Raspberry Pi 5 official Active Cooler
- 【Compatibility】Raspberry Pi 5 PCIe HAT only for Raspberry Pi 5 8GB / 4GB / 2GB / 1GB, Model: X1003
- 【M2 Key-M NVMe SSD Supported】Support M.2 KEY-M NVMe SSD 2230/2242 length installation. (Do not reserve the nut column to fix the 2230 SSD) 【IMPORTANT】DON'T use NVMe SSD with Phison controller, please refer to: https://wiki.geekworm.com/X1003#Important_Notes
15,80 €
Zuletzt Aktualisiert: 17.03.2025 20:57 Uhr
- Pi 4 Passive Cooling Case:Miuzei raspberry pi 4 Armor case, Aluminum Alloy Case for Raspberry Pi 4 Model B (8GB/4GB/2GB/1GB)
- External GPIO Interface:Easier to plug in gpio cables，With 3pcs Cooling copper and 4pcs Thermal Pads Helps Raspberry Pi 4 passive heat sinks conduct and dissipate heat quickly, can be cooled without fan noise
- Fully Enclosed Protection:Raspberry PI 4 with GPIO case is made of high-quality metal. The cover is fully sealed, which can effectively avoid dust. It protects your Raspberry PI 4 model B board from scratches, damage and short circuit
12,99 €
Zuletzt Aktualisiert: 17.03.2025 20:57 Uhr
- 【Pi 4 Aluminum Case】Compatible with Raspberry Pi 4 Model B(8GB/4GB/2GB/1GB)
- 【Passive Cooling Design】Don't need extra fan, heavy dute case with eight of 174g, with 4 built-in Heatsink Pillars for better heat dissipation
- 【Better Cooling Solution】equipped with a copper heatsink, can replace the thermal pad at the CPU with the copper heatsink, and attach proper silicone grease (not included) on two sides of copper heatsink to get better heat dissipation
11,99 €
Zuletzt Aktualisiert: 17.03.2025 20:57 Uhr
- Der 3,5-Zoll-Touchscreen wird mit einem speziellen Gehäuse für den Raspberry Pi 5 geliefert, das sowohl den Touchscreen als auch den Raspberry Pi 5 aufnehmen kann, wodurch eine perfekte Kombination aus Touchscreen und Raspberry Pi 5 erreicht wird.
- 480 x 320 Auflösung, 60 FPS Bildwiederholrate für Raspberry Pi, unterstützt 125 MHz SPI-Signaleingang, stabile Display ohne Flackern. (Hinweis: Der 3,5"-Touchscreen ist für Raspberry Pi 4 und Raspberry Pi 5 erhältlich, das Gehäuse jedoch nur für Raspberry Pi 5.)
- Kommen Sie mit Mini-Lüfter und Kühlkörper, stellen Sie sicher, dass Ihr Raspberry Pi 5 stabil arbeitet, um die beste Wärmeableitung zu erreichen, Sie müssen sich keine Sorgen um die Wärmeableitung machen.
24,99 €
Zuletzt Aktualisiert: 17.03.2025 20:57 Uhr
- Extrem kompaktes Raspberry Mainboard mit ARM11 Broadcom BCM2835 Single Core 1 GHz RAM 51.
Zuletzt Aktualisiert: 17.03.2025 20:57 Uhr